1. The composition materials of masks
In order to achieve good protection, the materials of masks need to have excellent performance in terms of airtightness, filtration, and breathability. Most masks on the market currently use the following materials:
1. Non-woven fabric: Non-woven fabric is a material that is used more frequently in the production of masks. It is a non-woven material composed of a fiber layer and an adhesive layer. It is commonly used in the filter layer and outer layer of national standard KN95 and N95 masks. Its main features are lightness, breathability, and dust isolation, but it is not waterproof enough.
2. Melt Blown Fabric: Melt Blown fabric is the most important filter material in masks. It can effectively filter tiny particles and is the best choice for manufacturing the filter layer of KN95 and N95 masks. Its filtration efficiency is as high as 95% or more. Melt blown fabric is made of microfibers sprayed from melted polypropylene particles, and has filtering properties for both water and oil.
3. Hot-pressed cotton: Hot-pressed cotton, also known as heat-sealed cotton, is a filter cotton material made of polyester fiber or synthetic fiber through bonding and molding. It is generally used in the inner layer of the mask. It can keep warm, absorb moisture, and be comfortable. It has no obvious filtering effect on protecting tiny particles such as viruses.
2. How masks are made
There are currently three main ways to make masks in the world: handmade, machine-made, and high-speed production line. Handmade production has low cost, but low efficiency, different mask sizes, and poor filtering effect. The size and style of machine-made masks are controllable, and the cost is slightly higher, but it greatly improves production efficiency and mask production quality. High-speed production lines are more efficient, can quickly produce a large number of masks, and can ensure that the size and filtering effect of each mask are consistent.

3. Maintenance and use of masks
When using masks, pay attention to waterproof, moisture-proof, and pressure-proof issues. Do not fold or bend the mask at will. It is best to use a paper bag or plastic bag to seal it when placing it. The service life of each mask is generally about 4 hours, provided that the mask has good filtering effect and is not contaminated or damaged. The mask should be replaced immediately when it is wet or stained.

Gongbing Medical Equipment Co.,Ltd has been specializing in personal protective products for more than 20 years.Like:Dispodable bouffant cap,clip cap,face mask and isolation gown.
We also get the certificate of ISO13485,EN13795-1,CE,MDR,and FDA registration.




