Breathable Membrane Nonwoven Fabric: Applications and Raw Materials

Jun 06, 2025 Leave a message

Differency between non woven shoes with buckle and without buckle
Breathable Membrane Nonwoven Fabric--Raw Materials

I. Primary Raw Materials:

The performance hinges on the specific polymers used to create the microporous or hydrophilic membrane and the nonwoven substrate:

Membrane Polymers:

Polyolefins (Dominant):

Polypropylene (PP): The most common choice. Offers excellent chemical resistance, low cost, good mechanical properties, and is readily processable into microporous films (e.g., via stretching or filler methods). Hydrophobic nature aids liquid barrier.

Polyethylene (PE): Often used in blends with PP or as co-extrusions (e.g., PP/PE/PP). Can offer better softness and lower melting points for bonding. Linear Low-Density Polyethylene (LLDPE) is common.

Polyurethane (PU): Used for hydrophilic monolithic membranes. These work by molecular diffusion - absorbing water vapor on one side and releasing it on the other. Offers excellent elasticity, softness, and durability. Thermoplastic Polyurethane (TPU) is frequently used.

Polyester (PET): Less common for the membrane itself in standard breathable laminates, but PET-based nonwovens are ubiquitous substrates. Sometimes used in specialized films.

Additives: Crucial for functionality:

Fillers (CaCO3, TiO2): Used in polyolefins to create micropores via stretching.

Surfactants/Hydrophilic Agents: Used in hydrophilic PU membranes or to treat polyolefin surfaces to enhance water vapor transmission.

Pigments, UV Stabilizers, Antioxidants: For color, longevity, and performance stability.

Nonwoven Substrate Polymers:

Polypropylene (PP): By far the most prevalent. Offers good strength, chemical resistance, low cost, and hydrophobicity. Made via Spunbond (S), Meltblown (M), or Spunbond-Meltblown-Spunbond (SMS) processes. SMS is particularly common, with the Meltblown layer adding fine filtration.

Polyester (PET): Used for higher strength, temperature resistance, and durability applications. Common in Spunbond (SB) or Spunlace nonwovens for technical uses.

Polyethylene (PE), Bicomponent Fibers (e.g., PE/PP, PET/PE): Used for specific properties like softness, lower melting point (for bonding), or bonding capabilities.

Viscose/Rayon, Cotton (Less Common in Laminates): Primarily found in non-laminated nonwovens; less suitable as the primary substrate for robust membrane lamination but sometimes used in specific hygiene product layers.

 

 

Professinal Knowledge Of Non Woven Bouffant Hair Net

Key Application Scenarios:

The combination of breathability and barrier protection makes this material indispensable in:

Hygiene Products (Largest Market Segment):

Baby Diapers & Training Pants: Used as the Backsheet. Prevents leakage of liquids (urine) to clothing/bedding while allowing water vapor (sweat) to escape, keeping the baby's skin drier and reducing rash risk. Also used in Top Sheets (facing the skin) in some premium designs.

Feminine Hygiene Products (Sanitary Pads, Liners, Tampon Backing): Acts as the Backsheet to prevent leaks onto underwear, while allowing moisture vapor out for comfort. Used in Top Sheets for dryness.

Adult Incontinence Products: Similar role as in baby diapers – Backsheet for leak prevention and breathable comfort, crucial for skin health in prolonged use. Also used in Top Sheets.

Medical & Protective Apparel:

Surgical Gowns & Drapes: Provides a critical barrier against blood, bodily fluids, and pathogens (splash resistance) for surgical teams and patients, while significantly improving comfort by allowing heat and moisture vapor to escape compared to traditional impermeable materials. Reduces heat stress.

Isolation Gowns: Protects healthcare workers from contaminants while maintaining wearer comfort during extended use.

Sterile Packaging: Used for packaging medical devices that require sterility but also need to undergo steam sterilization (autoclaving) – the membrane allows steam penetration but blocks contaminants afterward.

Wound Dressings: Some advanced dressings incorporate breathable membranes to manage exudate (allow vapor transmission) while protecting the wound from external bacteria and liquids. Creates a moist wound healing environment.

Technical & Outdoor Apparel:

Waterproof-Breathable Garments: Laminated to outer fabrics in jackets, pants, gloves, and footwear. Keeps rain and snow out (waterproof) while allowing perspiration vapor to escape (breathable), preventing the clammy feeling associated with traditional waterproof fabrics. Often uses PU membranes or specialized microporous films.

Sleeping Bags & Tents: Provides weather protection without internal condensation buildup.

Construction (Building Wrap):

Housewrap (Weather Resistant Barrier - WRB): Installed over sheathing and under siding/cladding. Blocks liquid water and air infiltration from the outside, while allowing water vapor trapped within the wall cavity to diffuse outwards. This is crucial for preventing mold and rot, promoting building durability and energy efficiency.

Filtration:

Used in specialized filter applications requiring breathability combined with fine particle, liquid, or even microbial filtration, leveraging the nonwoven substrate's structure and the membrane's barrier properties (e.g., in some medical or industrial filters).

 

 

 

Send Inquiry

whatsapp

Phone

VK

Inquiry