
what is the difference between ordinary masks and dust masks?
Dust masks are also called anti-particulate respirators, and China's respiratory protection standard GB2626-2019 clearly stipulates that the protection level of dust masks is divided into KN100, KN95 and KN90. The KN100 mask has a filtration efficiency of 99.97% for fine dust particles, which is the highest level of protection for dust masks. The filter cotton of dust mask is divided into barrier layer, adsorption layer and barrier layer. Particles above 20 microns are mechanically blocked by the barrier layer, particles above 5 microns are blocked by the adsorption layer, and ultrafine particles above 0.075 microns are adsorbed by the barrier layer. The KN95 mask has a filtration efficiency of 95%. Ordinary gauze masks are cheap, absorb sweat in summer, keep warm in winter, but the dust efficiency is very low, the dust resistance principle is mechanical filtration, although some large particles of dust can be blocked in the gauze, but can not prevent fine dust, especially less than 5 microns of dust, and therefore can not protect the harm of respiratory dust that is easy to lead to pneumoconiosis.
Ordinary medical non-woven masks are made of one or more layers of nonwoven fabric composite, which has a high filtration effect on bacteria and viruses, and is used to prevent infectious diseases transmitted through the respiratory tract. Its prevention effect is particularly good, but it is used to prevent dust, and its filtration effect is relatively poor. What are the types of dust masks? The first: disposable masks, that is, disposable masks that we commonly use, the current domestic disposable masks do not have N100, the highest is N95, and the dustproof rate is 95%, but the disposable masks themselves have a higher leakage rate, and the actual dustproof rate is below 75%. The effective protection time is about 20min. The second: half mask type. The half-mask protective mask of Baoshun 'an adopts bionic structural design and medical grade liquid silicone to ensure the maximum fit with the skin and ensure the air tightness of the mask. The unique filter element of Baoshun 'an adopts eccentric port design to maximize the viewing Angle, and the lower field of view can reach 70°; It can be used with KN100 series filter cotton, and the protection efficiency can reach 100%. Suitable for all dust working environments. Third: Full cover: close to the face, can cover the eyes, face, nose, mouth and jaw mask. Suitable for high-concentration toxic gas environment, leakage rate is not greater than 0.05%. According to the structure and working principle, it is actually divided into two categories, one is self-priming filter type, and the other is gas supply type.
What do the N and KN marked on the mask represent respectively? The N marked on the mask represents the use of the United States standard, KN is the Chinese standard. According to American standards, masks are divided into categories N, R, and P. Class N protects against non-oily suspended particulates. Class R protects both non-oily and oily suspended particulates. Class P protects both non-oily and oily suspended particulates. According to China's GB2626-2019 standard, masks are divided into KN and KP categories, KN means that masks are suitable for filtering non-oily particles, and KP means that masks are suitable for filtering oily and non-oily particles. The number after the letter represents the protection level of the mask, and the larger the number, the higher the protection level. Is there a difference between industrial N95 masks and medical N95 masks? Both have the same level of protection and pass the N95 level test. The filtered particles can be as small as 0.3 microns in diameter. In tests, particles with a diameter of 0.075 microns were blocked with a 95% success rate. N95 medical masks are used in the healthcare industry to protect against viruses while filtering fine dust particles. The N95 dust mask can only effectively block dust, and can not be a good protection against virus bacteria. N95 medical protective mask has the need to block the liquid splash function, the outer surface of the mask has a layer of green hydrophobic protective layer, the main role is to protect the slight liquid or blood splash penetration. The N95 dust mask does not have this layer of hydrophobic protection.



