Cleanliness level of purification workshop:
Hundred > thousand > ten thousand > one hundred > three hundred thousand
In fact, the clean level of the purification workshop is that the smaller the value, the higher the purification level, the higher the cleanliness, the higher the cost. One hundred thousand grade purification workshop refers to the clean workshop with air cleanliness of one hundred thousand grade, that is, the particle control per cubic meter in the workshop is within 10W, and the food workshop should reach one hundred thousand grade.
01, one hundred thousand class purification workshop standard
One hundred thousand grade purification workshop standard one: the number of particles ≥ micron is not more than 3.5 million dust particles, ≥5 micron particles is not more than 20,000.
Standard two of 100,000-grade purification workshop: the maximum allowable number of microorganisms, the number of plankton is not more than 500 /m; No more than 10 deposition bacteria per petri dish.
One hundred thousand grade purification workshop standard three: pressure difference. Clean room pressure difference of the same clean grade should be the same. The pressure difference between adjacent clean rooms of different clean grades should be greater than or equal to 5Pa, and between clean rooms and non-clean rooms should be greater than or equal to 10Pa (mainly to ensure that air flows from the clean area to the non-clean area and avoid airflow backflow).
02, purification workshop principle
Generally after the first effect filter, in effect filter, high efficiency filter and other three segments and airflow to effect at the beginning of purification, humidification section - heating section - table hot section to table cooling section, the effect of purifying - fan air - pipe to efficiently purify tuyere, blow into the room to go at the beginning of the dust particles such as bacteria - return air shutters - effective purification, repeat the above process can achieve purification.
03, how to test whether the 100,000 grade purification workshop is up to standard?
Sedimentation bacteria determination method:
Sedimentomycetes are bacteria that are carried in dust that settles on the ground or surfaces. Several sterile petri dishes with an inner diameter of 90 mm were taken when the sterile operating table was open, and 15 ml of nutritional AGAR medium was melted and cooled to 45℃ for aseptic operation, respectively, and poured into an incubator at 30-35 ℃ for 48 hours to prove that they were sterile for backup use.
Put the petri dish that has been covered with nutrient AGAR medium in the designated area at a specified place about 1 meter above the ground (generally, one dish is placed every 10 square meters), expose it in the air for 30 minutes, collect sedimentation bacteria, cover the dish well, put it in the incubator at 30-35℃ for 48 hours, take out and count, and the workshop should be in operation state. The number of sedimentation bacteria detection, each dish is less than or equal to 10, can reach the level of 100,000 purification workshop standard.
In general, sedimentation bacteria monitoring once a month can be. Purification workshop engineering commonly used instruments are temperature and humidity meter, temperature and humidity meter, digital anemometer, infrared thermometer, differential pressure meter, multi-functional sound level meter, particle counter, air volume meter, etc., they are conventional real-time detection equipment, to help detect whether to reach 100,000 level of purification workshop standards.



